How to Change the Print Size of a Digital Photo

Epson GS6000 Printer. (Elevate Printing/Flickr/CC BY 2.0)

Many digital photos will open into your photo editing software with a resolution of 72 ppi. This is either because your digital camera does not store resolution information when it saves the photo, or the software you are using can't read the embedded resolution information. Even if your software does read the resolution information, the embedded resolution may not be what you really want.

Fortunately we can change the print size of digital photos, usually with little or no loss in quality.

To do this, look in your photo editing software for an "Image Size," "Resize," "Print Size," or "Resample" command. When you use this command you will be presented with a dialog box where you can change pixel dimensions, print size, and resolution (ppi).


When you want to change print size without loss in quality, you should look for a "resample" option in this dialog box and make sure it is disabled.

Constrain Proportions

When you want to change the print size without stretching or distortion, look for a "constrain proportions" or "keep aspect ratio" option and make sure it is enabled. (With this enabled, you may not be able to get the exact dimensions you need.)


When the resample option is disabled and the constrain proportions option is enabled, changing resolution will alter the print size and print size will alter the resolution (ppi). The ppi will get smaller as the print size increases.

If you know what size you want to print, enter the dimensions for the print size.

  • If the ppi changes to 140 or less, you will get a low-quality print at that size.
  • If the ppi changes to 141-200, you will get an acceptable quality print at that size.
  • If the ppi changes to 201 or higher, you will get a high-quality print at that size.


    If you do not have enough pixels to get an acceptable or high-quality print, you will need to add pixels through resampling. Adding pixels, however, does not add quality to your image and will usually result in a soft or blurry print. Resampling by a small amount is generally acceptable, but if you need to increase the size more than 30 percent or so, you should look into other methods of increasing image resolution.