How to Make a Roman Candle Firework

Easy Homemade Roman Candle Firework Project

This diagram illustrates the structure of a typical Roman Candle firework.
This diagram illustrates the structure of a typical Roman Candle firework. Petteri Aimonen, public domain

A Roman candle is a simple traditional firework that shoots colored fireballs into the air. It consists of a cardboard tube that is sealed at the bottom and lit by a fuse from the top, with one or more charges stacked along the length of the tube. Typically the charges are separated from each other by a layer of clay or sawdust. Here are instructions on how to make a homemade Roman candle.

Key Takeaways: How to Make a Homemade Roman Candle

  • A Roman candle is a firework that shoots fireballs into the air. Each fireball is a separate star that is separate from the next by a layer of clay.
  • While Roman candles are simple to construct, making them is not a beginner-level project. It's best to have experience with simpler fireworks, like firecrackers and sparklers.
  • Roman candles should only be constructed and used by responsible adults. Check local guidelines to make certain they are legal where you live.

Roman Candle Materials

Roman candles come in a variety of sizes. For a home project, it's best to start small. The 1/2" tube probably is the easiest/safest to work with, since you have some space to add the materials, yet have a fairly small charge.

  • 1/4" - 1/2" cardboard rocket body tube
  • 1/8" fuse, about a foot
  • Bentonite clay
  • Black powder or pyrodex
  • Star composition (sample recipe provided in instructions)
  • Masking tape

Make a Roman Candle

Work in a cool area, away from sources of flame. Don't grind pyrotechnic compositions -- be gentle.

  1. Cut the tube so that you have a 10" length. It's a good idea to measure and note the length so that you know, for future projects, whether to adjust the length shorter/longer.
  2. Wrap the tube with paper or masking tape. The purpose of this is to reinforce the tube so that the charge shoots up and out of the tube rather than splitting the cardboard open.
  3. Seal the bottom of the tube with a clay plug. About 1/2" of clay should be good, although more is fine. You can substitute epoxy glue, if you prefer. The point is to seal the tube so that the charge moves up and out of the tube rather than escaping through the bottom.
  4. Run the fuse down the tube to the clay plug. The firework will be lit from the top, burning down the fuse to light successive charges.
  5. Add a layer of black powder (about an inch). One easy way to deliver the powder into the tube is by sprinkling it into a rolled sheet of paper.
  6. Add your "star" composition. There are numerous formulas for this, depending on the effect you want. One straightforward recipe is to collect the coatings from two 6 inch sparklers, mix it with a small amount of flash powder and black powder or Pyrodex (by volume, 60% sparkler, 20% flash powder, 20% Pyrodex). Add water to this mixture, a drop at a time, until you can roll it into a ball that just fits inside the bore of your tube. Roll as many of these as you need for your candle; allow them to dry. Drop a ball into the tube, on top of the black powder.
  7. Press tissue paper or sawdust or a small amount of clay on top of the ball. You can tamp the paper or sawdust into the tube using the eraser end of a pencil. This is the delaying charge, that prevents additional layers of material from burning all at once so that each charge will shoot into the air. This completes your first charge. If this is your first Roman candle, this is a good stopping point to see what you will get/know what to expect. Otherwise... repeat layers of black powder, a star, and the delaying charge until the tube is filled.
  8. With any tube-shaped fireworks, it's a good plan to shoot them off in a depression or hole, preferably in a tube or packed into soil so they cannot point in an unintended direction. Light the firework and get clear. The expected range of the firework is about 30 feet.


  • If you need the charge to shoot higher, try using a longer tube or slightly more black powder in your lift charge.
  • If the colored fireball doesn't ignite, try adding a higher percentage of Pyrodex in the star mixture.

Safety Notes

  • This is a project for adults who already have some pyrotechnic experience. If you are new to making fireworks, try one of the other firework projects, such as a homemade smoke bomb or sparkler.
  • Be aware of the laws where you live! Roman candles may be prohibited. If so, obviously, don't make one or set it off.
  • Do not ignite a Roman candle in your hand. Do not point a Roman candle at anyone or anything.
  • Use good judgment and follow safe practices when lighting making or lighting this or any other firework. Be sober, away from flammable materials and clear of pets, people or structures.

Disclaimer: Please be advised that the content provided by our website is for EDUCATIONAL PURPOSES ONLY. Fireworks and the chemicals contained within them are dangerous and should always be handled with care and used with common sense. By using this website you acknowledge that ThoughtCo., its parent About, Inc. (a/k/a Dotdash), and IAC/InterActive Corp. shall have no liability for any damages, injuries, or other legal matters caused by your use of fireworks or the knowledge or application of the information on this website. The providers of this content specifically do not condone using fireworks for disruptive, unsafe, illegal, or destructive purposes. You are responsible for following all applicable laws before using or applying the information provided on this website.

mla apa chicago
Your Citation
Helmenstine, Anne Marie, Ph.D. "How to Make a Roman Candle Firework." ThoughtCo, Jul. 29, 2021, Helmenstine, Anne Marie, Ph.D. (2021, July 29). How to Make a Roman Candle Firework. Retrieved from Helmenstine, Anne Marie, Ph.D. "How to Make a Roman Candle Firework." ThoughtCo. (accessed March 31, 2023).