*My thanks to guest author Jonathan Roberts, who has kindly taken the time to write about the physics of table tennis, saving me the need to strain my brain trying to figure this stuff out!*

Firstly, a very brief introduction to the mathematics that is used to describe Table Tennis. There are a handful of formulae that are used, which a man called Sir Isaac Newton derived in his monumental work *Philosophae Naturalis Principia Mathematica*.

Incidentally, this work is generally regarded as the single most important work ever written in the history of science, and I regard Newton as the greatest scientist to have ever lived.

It accurately explains how objects move from the scale of interstellar objects (galaxies, stars, planets, SERIOUSLY BIG STUFF etc.), down to things on the scale of about 1000th of a millimeter or 1 micron. After that, this model of the universe starts to break down and you need to go to Quantum Theory and Relativity, which involves FRIGHTENING Mathematics and Physics to use.

Anyway, this is the Physics and Mathematics of Table Tennis in the Newtonian Universe.

The basic formulae to be used here are:**P = W÷tW = FsF = maa = (v - u)÷t **

*Note: This is usually rearranged to v = u at*T = rF

*Note: When two letters are next to each other it means multiplication. This is the correct notation. Take the second formula as an example,*

**W = Fs**This is expressed as**W = F**multiplied by**s**or**W = F x s**.Where:

P = Power (The amount of oomph that is applied)

W = Work (The amount of energy that is consumed)

t = Time (Length of time the Power is applied for)

F = Force (Basically the amount of grunt the shot has. Similar to P but subtly different)

s = Displacement (this essentially translates to Distance, except under certain circumstances)

m = Mass (weight of the ball, fixed at 2.7g)

a = Acceleration (change in velocity over a given time period)

v = Velocity (speed of the shot)

u = Initial Velocity (how fast the ball is hit at you)

T = Torque (The amount of Turning Force that is applied)

r = Radius (the length from the middle of a circle, to the perimeter.)

### P = W÷t

In order to gain more **power** in your shots, you have to do more **work** or take less **time** in your shots. The **time** in a shot refers to the time the ball is in contact with the racket which is fixed at approximately 0.003 seconds. Therefore, in order to increase the **Work** done, the second equation must be examined:

### W = Fs

If the amount of **Force** is increased, then the **Work** coefficient is increased. The other way is to increase the **Displacement**, but that cannot be done as the length of the Table is fixed (technically, lobbing or looping the ball will increase the **Work** done, as the ball has to cover a larger distance than ball that barely clears the net). In order to increase **Force**, the third equation must be examined.

### F = ma

In order to increase the **Force**, the **Mass** of the ball needs to be increased which is impossible, or the **Acceleration** needs to be increased. In order to increase the **acceleration**, we analyse the fifth equation.

### a = (v - u)÷t

The result of the calculation between the brackets must be calculated first (it's a mathematical law). Therefore you want to maximize the **acceleration**, minimize the **initial velocity**. In order to maximize the **velocity**, you have to hit the ball as hard as you can.

The **initial velocity** is something you have no control over, as it is how hard the opposition hits the ball at you. However, as the **initial velocity** is coming towards you, its value is negative. So it is actually added to your **velocity**, as subtracting a negative number actually means you add the two terms (another mathematical law). The **time** remains fixed, for the reason explained above.

Therefore this demonstrates why the harder you hit the ball, the more **Power** it will have.

But, speed is not everything in Table Tennis. There is spin, which will now be discussed.

### All About Spin

Jonathan discusses the subject of spin in table tennis here. Read this before reading the text below.

### Reaction Speed in Table Tennis

From a biological perspective, there are limits to how fast the body can react to a stimulus.

There is a difference in this time between an audio stimulus and visual stimulus. Technically we respond faster to an audio stimulus than a visual stimulus, 0.14 of a second compared with 0.18 of a second respectively. Therefore, if you can work out EVERYTHING about the shot you need to just by hearing it strike the racket, you're 0.04 or four one hundredths of a second faster than anyone else who has ever played table tennis before.

Good players (even average players like myself) can still deduce a lot of what the opposition is doing, simply by listening to the noise the ball makes when it contacts the bat. For instance a brushing noise of the ball on the bat tells you that spin has been put on the ball, hitting a loop will give this effect. A sharper 'pock' will tell you that the ball has been struck quite solidly, and will also tell you that they're using a thin rubber. It is, of course, legal to ask to view the opposition's bat, so listening to the noise to tell what thickness rubber is being used is just something that can be done.

Some people say that when the ball strikes the table they can tell whether the ball is top spun or under spun. Personally, I can't, but it wouldn't surprise me that elite players can.

In Table Tennis, the average total time to react to a shot is usually around 0.25 of a second. With lots of training and lots of practice, this can be reduced to 0.18 of a second. This is one of the big factors in what separates the greats of table tennis, from the top A grade players. In elite levels of the sport, even being the smallest fraction of a second (1/1000ths) faster starts to make a difference.

### Torque in Table Tennis

**T = rF**

Torque is a Force that occurs when it is applied at an angle around a fixed point. This is usually a circle. There are several places that I've seen Torque used in Table Tennis. Some common places are:

- Maximizing the spin on the ball. By doing this a sphere (the ball) is rotated about a point inside it. This means that the faster the ball is spinning the higher the
**Torque**.

- Unwinding the body when playing a powerful shot such as a smash. You unwind your hips, then your torso, then your shoulders, upper arm, lower arm and finally wrist. This increases the
**Radius**of the swing. By hitting the ball toward the outer rim of the racket will also increase the radius. I don't know if this is used in the game, as doing this would mean the ball is striking the racket outside of the sweet spot and causing a loss of control. - When serving a forehand pendulum serve, one technique is to trick the opponent by minimizing the amount of spin put on the ball. This is done by contacting the ball close to the handle, thereby minimizing the
**Radius**of the swing.

Technically hitting the ball harder (with a higher velocity) also increases the Torque, as this increase in velocity results in a direct increase in the acceleration of the ball. As **F = ma**, an increase in **a** leads to a direct increase in **F**, which in turn leads to a direct increase in **Torque**.

i.e.**a** = (**v** - u)/t**F** = m**a****T** = r**F**

**Energy**

Energy cannot be observed. Only the results of Energy can be observed. That is, when a ball is hit hard, you are observing the transfer of Energy from the body of the player to the ball to cause that shot, not Energy itself.

Energy is described in two forms (ignoring a smattering of other forms, which, without getting extremely technical in chemistry and nuclear physics, are beyond the scope of this article). These are Potential Energy and Kinetic Energy.

The formulae used are:

Potential Energy: **E = mgh**

Kinetic Energy: **E = ½mv2**

where

E = Energy

m = Mass

g = The acceleration due to gravity (9.81001 ms-2 to 5 decimal places if you must know)

h = Height of the object

v = Velocity

**E = mgh**

This is a representation of Potential Energy. This represents the ability of the object in question to use Energy. For instance, if a Table Tennis ball was in your hand and you remove your hand quickly, the ball would start to fall (due to gravity). As this occurs, the ball's potential energy starts to be converted to kinetic energy. When it hits the ground, the kinetic energy starts to change back to potential energy, till the ball reaches the peak of its bounce, and starts to fall again.

Theoretically, this should continue forever, as Energy cannot be created or destroyed (except in a nuclear reaction, which involves what is probably Science's most famous equation: **E = mc2**). The reason it doesn't continue forever is due to air resistance, in the form of friction, and the fact that the collision of the ball and the ground isn't perfectly elastic (some of the ball's kinetic energy is converted to heat, when it impacts with the ground, and there is also some friction between the floor and the ball).

If you want to conduct an experiment (you can make quite a bit of money out of this 'trick'), try dropping a golf ball and a table tennis ball from the same height and see which hits the ground first. Both will strike at the same time, as the resistance due to air is almost exactly equal. Another way is to perform the experiment in a vacuum, though this is a harder to set up. In that case, you can drop a feather and a brick, and the two will strike the ground simultaneously.

This explains why a serve with a high ball toss is more dangerous than one tossed only 6 inches high. The Energy gained by the high toss can be converted to spin or speed when struck by the racket.

**E = ½mv2**

This formula shows that the faster you hit the ball, the more Energy the shot will have. If the mass of the bat is high, then it will also result in more Energy in the shot. This is because the mass and energy terms are both directly proportional to the Energy.

### Why Is the 38mm Ball Faster Than the 40mm Ball?

As the 38mm ball has a smaller radius, it also has a lower mass, and therefore a lower Energy due to the equation **E = ½mv2**. This should therefore mean that the overall velocity of the ball is lower. BUT, the 38mm ball is faster than the 40mm ball because the increase in the radius results in an increase in the wind resistance, thus slowing down the 40mm ball. When you deal with objects of low mass like a table tennis ball, air resistance is a major factor in slowing it down.

And that is a basic introduction to the physics of table tennis.