Trim Size

The final size of a printed document is the trim size

crop marks, trim size
Crop marks in corners indicate where to cut paper to get it down to the final trim size. | Paper Term | Printing & Finishing Term | Alpha Index to Full Dictionary:. # | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | XYZ

The final size of a printed page after excess edges have been cut off is the trim size. Commercial printing companies often print several copies of one document on the same large sheet of paper. This reduces press time and often saves on paper cost. Then the company trims the large sheet down to the finished size of the printed piece—the trim size.  Crop marks indicating where to cut are printed at the edges of the large sheet of paper as guides.

Those marks are trimmed off the final piece. For example, four 8.5 x 11 inch brochures can be printed on one 17.5 x 22.5 inch press sheet with room for the press gripper, color bars and trim marks.

In page layout software, the trim size is the same as the document size in the software, unless you have ganged several pieces in one digital file. Any bleed allowance, color bars or crop marks lie outside the trim size. They print on the large sheet of paper, but are cut off before the product is delivered. 

When designing small pieces, such as business cards, the cards must be run on larger sheets of paper because the printing press can't run tiny sheets of paper. Whether you supply the digital file one up and the printer imposes it 10-up (for business cards) on an 8.5 x 11 inch sheet of card stock, or you supply the file already set up at 10-up, the final trim size of a standard business card is 3.5 x 2 inches.

Trim Size Isn't the Same as Cut Size, Necessarily

Paper referred to as cut-size is paper has been trimmed to a small size before it is printed. Letter-size paper and legal-size paper are both considered cut-size paper. Trim size is not the same as cut size, unless the project requires no trimming and the project is printed on cut-size paper.

So, if you print an 8.5 x 11 inch document on 8.5 x 11 inch paper, for example, trim size and cut size are the same.

One way to save money on printing and finishing is to design for and print on standard cut sizes of paper to avoid the added time and expense of using larger sheets and cutting them down to trim size. For example, print an 8.5 x 11 inch document one-up on 8.5 x 11 inch paper. This isn't possible when designing layouts that have bleeds, scores or perforations, because the document must be printed on a larger sheet of paper and then cut down to the trim size.