Using OpenType Extended Characters in Illustrator

01
of 08

Using the OpenType Panel in Illustrator CS5

How to use glyphs in Illustrator
How to use glyphs in Illustrator. Text and images © Sara Froehlich

Software: Illustrator CS5

Illustrator ships with a variety of OpenType Fonts that often have a myriad of extended characters (also known as glyphs) that can add real flair to your layouts. There are also many OpenType fonts for sale online. But how do you access them? The Open Type and Glyphs Panels make it easy. This two-part tutorial will cover the OpenType panel this time, and next time we will look at using the Glyphs panel.

More About OpenType:
• OpenType Fonts
• What you need to know about OpenType fonts
How To Install TrueType or OpenType Fonts in Windows
How To Install Fonts on a Mac

02
of 08

How to Tell if a Font is an OpenType Font

How to Tell if a Font is an OpenType Font
How to Tell if a Font is an OpenType Font. Text and images © Sara Froehlich

Go to File > New to start a new document. Choose the Text tool. Go to the menu and choose Type > Fonts. The open type and glyphs panels only works on OpenType fonts so you need to make sure you are choosing an OpenType font rather than a TrueType font. The font menu shows a blue TrueType icon by fonts which are TrueType (it looks like two T's), and it shows a green and black OpenType icon by all of the OpenType fonts that looks like an O. This makes it very easy to see which fonts on your system will work with the Glyphs Panel. Illustrator ships with a lot of OpenType fonts, and you can buy more from sites like MyFonts.com. Fonts which have the word Pro after them have extended characters, so try to choose one of those. Even among pro fonts some have more extra characters than others.

03
of 08

Working with the Text

Guadalupe Pro Gota Font
Guadalupe Pro Gota Font. Text and images © Sara Froehlich

Type a phrase to practice on. Because you haven't chosen any glyphs, the font will look normal. I am using a font called Guadalupe Pro Gota, an open type Pro font I purchased from MyFonts.com. If you are reading this, you probably work with fonts enough to know that they vary widely in the shape of the characters offered and the style of the lettering. The Guadalupe Pro Gota font is not exactly plain vanilla Helvetica as it comes out of the box so to speak, but you can add even more interest to the letters with the extended character set.

04
of 08

Dressing up Your Text with Extended Characters

Text with Extended Characters
Dressing up Your Text with Extended Characters. Text and images © Sara Froehlich

After adding extended characters to the phrase you can see a big difference. Some fonts have multiple extended characters for the same type character so you can choose the mood of the type to match the layout. Characters available vary widely from font to font.

05
of 08

The OpenType Panel: Figure Menu

OpenType Panel: Figure Menu
OpenType Panel: Figure Menu. Text and images © Sara Froehlich

Go to Window > Type > OpenType to access the OpenType Panel. The Figure dropdown menu lets you choose the way the numeral characters are rendered. Default is tabular lining.

  • Oldstyle figures are Arabic numerals that vary in height and position. 3, 4, 5, 7, and 9 descend below the baseline, and the others sit on the baseline. 6 and 8 are taller than the other numerals.
  • Lining figures are the same size and height as the uppercase characters in the font and sit on the baseline. The lining styles are the best choice when creating tables or other layouts where you want the characters to be perfectly aligned.
  • Tabular figures are mono-width; each numeral is the same width as every other.
  • Proportional figures are different widths. For example, the character 1 is narrower than the 0 (or any other character) and the numerals fit together more like letters.
06
of 08

The OpenType Panel: Position Menu

OpenType Panel: Position Menu
OpenType Panel: Position Menu. Text and images © Sara Froehlich

The Position dropdown menu sets the position of the numerals in the line.

  • Default position means the numbers line up in whatever style you have chosen in the figure menu. This is the default, and what you will use most often.
  • Superscript/Superior position means the superscript numeral is above the highest numeral, as seen here in the numeric rendition of one hundred to the fourth power.
  • Subscript/inferior positon means the numbers are smaller and drop below the baseline as seen here in the chemical formula for water.
  • Numerator and Denominator are used when writing fractions.

Next, the fun part: the characters!

07
of 08

Extended Characters on the OpenType Panel

Extended Characters on the OpenType Panel
How to use the OpenType Panel to Add Ligatures and Other Special Formatting. Text and images © Sara Froehlich

At the bottom of the OpenType panel are icons you use to change the characters of selected letters. Choosing the Move tool and clicking a text line or text box will allow you to change all of the characters at once, but you will probably want to use discretion on some of these as too many swashes and flourishes can make the text hard to read. It depends where the text is which of these options you want to use. Note that if the button is grayed out, like the standard ligature button shown here, it means there are no selected characters that can have this option applied.

08
of 08

Applying Extended Characters

Applying Extended Characters
Extended Character Types. Text and images © Sara Froehlich

So what do these buttons actually mean?

  • Standard Ligatures are letters that are combined into a single character like the fi in find or the th in them.
  • Discretiionary ligatures are more decorative than standard ligatures.
  • Swash adds an extended flourish to a character, such as a long flourish on a serif.
  • Stylistic alternatives are alternate characters of the same letter.
  • Titling alternates are alternate versions of capital letters, usually used only on titles or headlines, and sometimes as the first word in a chapter or section.
  • Ordinals are the superscript characters like you would see in addresses the numeric equavalent of words like first or second.
  • Fractions lets you write fractions more elegantly using numerator and denominator positions.

You can apply the extended characters to all of the text or apply it only to selected letter or letters. More than one extended character type can be added to the same characters.

Next time we'll talk about the glyphs panel and I'll show you even more tricks using extended characters with OpenType fonts.

Continued in Part 2: Using the Glyph Panel in Illustrator CS5
Format
mla apa chicago
Your Citation
Froehlich, Sara. "Using OpenType Extended Characters in Illustrator." ThoughtCo, Mar. 3, 2017, thoughtco.com/using-opentype-extended-characters-in-illustrator-1701835. Froehlich, Sara. (2017, March 3). Using OpenType Extended Characters in Illustrator. Retrieved from https://www.thoughtco.com/using-opentype-extended-characters-in-illustrator-1701835 Froehlich, Sara. "Using OpenType Extended Characters in Illustrator." ThoughtCo. https://www.thoughtco.com/using-opentype-extended-characters-in-illustrator-1701835 (accessed November 21, 2017).